Garment Tagging Best Practices for Dry Cleaners
Lost garments, mixed-up orders and disputes about stains almost always trace back to the same moment: intake. A garment that is tagged, inspected and recorded properly at the counter is easy to track, easy to assemble and easy to defend if a question comes up later. This guide covers the habits that make tagging reliable, from inspection to the final assembly check.
Published · CleanerHawk
Why tagging at intake matters
Once a garment leaves the counter it passes through several hands: cleaning, spotting, pressing, assembly and bagging. At each step it is separated from the rest of the order. The tag is the only thing that connects it back to the right customer.
Good tagging gives you three things:
- Accurate piece counts, so the customer gets back exactly what they brought in.
- Traceability, so you can tell where a garment is and who handled it.
- A record of condition, so pre-existing stains and damage are documented before cleaning.
Inspect every garment before it is tagged
Inspection takes seconds per piece and saves hours of arguments. Make it a routine done the same way every time, ideally with the customer still at the counter:
- Check the pockets. Pens, lipstick, receipts and cash cause damage or disputes. Return anything you find.
- Look for stains and ask the customer what they are and how old they are. Fresh, identified stains are much easier to treat.
- Check for damage: tears, holes, missing or loose buttons, worn seams, fading, shine and broken zippers.
- Read the care label. Note items with no label or with "do not dry clean" instructions.
- Note trim and accessories such as belts, detachable collars, hoods or ornamental buttons that may need to be removed or protected.
Point out anything significant to the customer before they leave. "There is a small tear near the hem; we will clean it but cannot guarantee it will not open further" is a much easier conversation at drop-off than at pickup.
Record stains and damage on the ticket
Notes only help if they are written where everyone can see them. Record each finding against the specific garment on the ticket, not as a general note on the order. Use consistent short phrases so the spotter and presser understand them immediately: "coffee, left sleeve", "missing button, cuff", "shine on seat".
Photos are even better. With garment photos, staff can photograph a stain or tear with a tablet or phone at drop-off, and the photo is stored on the ticket and visible in the customer's app. A photo settles most disputes about whether damage was there before cleaning.
Findings at intake are also where upcharges come from. A heavy stain or a delicate fabric noted on the ticket justifies the extra charge and tells the plant to handle the piece accordingly.
Use one barcode tag per garment
Handwritten tags and color-coded paper systems work, but they depend on legible handwriting and staff memory. A printed barcode tag for each garment removes most of that risk. Each tag carries the ticket number and the piece number, such as "1042, 2 of 3", so anyone can tell which order it belongs to and how many pieces to expect.
Printed garment tags and barcodes come from a thermal tag printer at the counter, one per garment. Attach tags in a consistent spot for each garment type, such as the inside of the left collar on shirts or the waistband label on pants, so the plant always knows where to look. Use tags and fasteners that survive your cleaning process, or heat-seal tags for items that go through it with the tag attached.
Tag bags for quick drops and delivery
Not every order is itemized at the counter. Busy customers leave a bag and go, and delivery orders arrive bagged. In both cases, tag the bag immediately so it is linked to a customer and a ticket from the first minute.
With quick drop, a ticket and bag tags print as soon as the bag is dropped off. The garments are then itemized, inspected, priced and tagged individually later, at the counter or in the plant. The order cannot be marked ready or released until it has been itemized, which closes the gap where untagged garments usually go missing.
Scan at each station in the plant
Tags are most useful when they are scanned at every step. Scanning a garment at cleaning, pressing and assembly creates a trail, so when a customer asks about a missing piece you can see where it was last scanned rather than searching every rack.
Station scanning also shows where work is piling up. If many garments have been cleaned but not pressed, you know where to move staff. Plant production tracking marks an order ready only when its last garment is assembled.
Check the count at assembly
Assembly is the last chance to catch a mistake before the customer does. The assembler should confirm three things for every order:
- The piece count matches the ticket, with every numbered tag present.
- Every garment belongs to this ticket, with no strays from a neighboring order.
- Notes from intake, such as a missing button to be replaced, have been dealt with.
Hang the completed order in an assigned rack location and record it, so the counter can find it instantly. Voice-guided assembly, which announces the ticket, piece number and rack location as each tag is scanned, helps assemblers work quickly without reading every tag.
If a piece is missing, do not release a partial order without telling the customer. Find it, or explain clearly what is outstanding and when it will be ready.
Train everyone on the same routine
Tagging only works when everyone does it the same way. Write the routine down on one page: inspection steps, where tags go on each garment type, how to record stains, and what to do when something does not match. Walk new staff through it on their first day and check a few of their tickets in the first week.
Good tagging also makes the end of the day easier, because open tickets and their status are accurate. Our end-of-day checklist picks up from there.
Common questions
Where should a garment tag be attached?
Pick a consistent spot for each garment type, such as the inside collar of a shirt or the waistband label of pants. Consistency lets plant staff find the tag quickly without searching.
Should I note stains on the ticket even if I can remove them?
Yes. Recording stains at intake tells the spotter what to treat, supports any upcharge and documents the garment's condition in case the stain does not come out fully.
What is the difference between a garment tag and a bag tag?
A garment tag identifies one individual piece and its ticket. A bag tag identifies a whole bag of items, typically for quick drops or delivery, before the garments have been itemized.